Wirecast and Stickam

[andrewzarian]

Broadcasting on stickam is a little different then the other streaming services (Ustream,JTV..)

1. Make sure you have the correct broadcast settings. You must set Stickam to Advanced (FMLE, Tricaster, Wirecast etc)
2. you have to log onto your Stickam Broadcaster Page Click GO LIVE on the front page of stickam

Here are some images to help you

Screen Shot 2012-04-07 at 6.27.22 PM.jpg

Screen Shot 2012-04-07 at 6.28.17 PM.jpg

[Denzel]

I do manage to get to that screen and I have it set up through Wirecast/Stickam but the issue is that it's not broadcasting. I used these > (http://www.telestream.net/pdfs/custo...to-Stickam.pdf) instructions.

[andrewzarian]

Im not too sure Denzel. Best thing would be to reach out to Wirecast for support. I tried following the steps here and it works. The only confusing part is logging into stickam as well as connecting with Wirecast.

[andrewzarian]

Hey Denzel, How did it work out for you ?

[Denzel]

Sorry for the late response. I figured that it's a lot easier for me to just not use Stickam. I had a friend try it out with his set up and it's working fine for him. After you made your post about it working fine I just gave up haha.